Choose the right induction hob for your kitchen

At Ztove, we have sold many induction hobs over the years and are always happy to help you find the right solution for your kitchen. When our customers need to replace their hob, they often find themselves in the following situations:

• Kitchen renovation in existing house/apartment
• New kitchen in new house/apartment
• Their induction hob is broken
• They want a Ztove induction hob with temperature control instead of gas, glass ceramic or regular induction

Depending on your situation, there are a few things you should be aware of before you get started. That said, changing an induction hob often doesn't take much longer than hanging a new lamp once you've found your next hob.

What should you consider before buying a new hob?

Start by looking at the space available in your kitchen, the dimensions of your current worktop cutout and how many pots and pans you typically use at the same time.

You should also decide whether you want a standard surface-mounted hob, a flush-mounted installation or a model with an integrated extractor.

No matter which induction hob you need, there are some basic things you should know. Once you know these things, you'll have a much easier time making the right choice.

What size hob do you want?

• If you have a smaller kitchen and still want some counter space to work with, consider a Ztove 60 cm induction hob. It's a classic size that most people are familiar with from a stove.
• If you have a larger kitchen, we recommend a Ztove 80 cm induction hob. It doesn't take up too much space, but still allows you to keep larger pots and pans on at the same time. This way, you'll have some space when you're cooking.
• If you have a larger kitchen or a kitchen island and want to avoid an extractor hood at the top, we recommend a Ztove 80 cm induction hob with a built in extractor hood. It will take up a drawer under the hob, but it leaves a lot of space at the top where you can have a wall unit or nothing at all.

Should the induction hob be levelled or flush-mounted?

• If you want a levelled induction hob, make sure you buy one that has straight edges. A levelled cooktop is a cooktop that is installed so that it is level with the worktop. All Ztove hobs have straight edges. Here you need a precise cut-out of your worktop and your cooktop needs to be grouted.
• If you want a flush-mounted induction hob so that the glass plate sits on top of the table, it's a little easier, as you don't need to cut the same very precise measurements as with flush mounting. Having a flush-mounted cooktop is by far the most common and easiest option.

Installing/assembling your new induction hob

We always recommend using a professional to install your new induction hob. Not all kitchens are the same, so here we'll go through the specific things you need to be aware of if you find yourself in one of the above mentioned scenarios.

New hob in your new kitchen

When you're renovating your kitchen or building a new one, you have almost all options depending on the size of your kitchen. Consider how much worktop space you need for everyday tasks.

Find the right hole dimensions for your worktop cut-out

• The right hole dimensions for a levelled hob are important if you want a beautiful finish in your new kitchen. Here you need to take into account the thickness of the glass plate and the curvature of the edges, among other things. In addition, the hob must be level with the top
• The correct hole dimensions for a flush-mounted hob are a little easier, as you only need to take into account the dimensions of the 'box' underneath the glass top. It is therefore a much simpler cut-out.

If you get your kitchen supplier to cut your worktop, simply send them the installation instructions and they should be able to do the rest.

Installation instructions and hole dimensions for Ztove hobs can be found here:

Ztove 60 cm induction hob manual
Ztove 80 cm induction hob manual
Ztove 80 cm induction hob with a built-in extractor hood manual

You are also always welcome to refer them to us via info@ztove.com or on +45 78 707 707 if your next hob is a Ztove induction hob.

Your hob is broken or you want to replace it

When you're installing a new induction hob in an existing kitchen, there are a few more things to consider than if you're building a new kitchen.

Measure the current hole in your worktop

This should always be the first step in finding a new hob that fits your kitchen. You can often do this by lifting the hob up from below, unless your current hob is levelled.

• If your current cooktop is levelled and sealed, you can simply measure the width and depth of the hole itself and the width and depth of the glass plate. There will rarely be cases where the 'box' underneath doesn't fit in the hole. Then compare it to the hob you would like to have.
• If your current hob is flush-mounted, in most cases you can tilt it up by putting your hand through the drawer. If there's an oven under your hob, find something flat and stick it under the glass top and carefully detach it from the worktop by tilting it up. Be careful not to damage your worktop or hob. Spend a little more time.Measure the hole once you've tilted it up.
• If you don't know how to do the above, you may be able to find the hob model number by doing an image search on Google or looking it up on your receipt from when you bought it. If you write to us at info@ztove.com, we'll be happy to help you find the right measurements.

If you have an induction hob with a built-in extractor hood, it's also worth finding out how tall your current solution is compared to the solution you'd like to implement. In other words, how far does the engine go into your base cabinet

If you want a larger induction hob

If you currently have a 60 cm induction hob and would like to change to an 80 cm induction hob, follow the above and find your current hole dimensions and figure out what new hole dimensions you need.

Find out what type of worktop you have. The type of worktop you have will determine the cost of cutting the hole to size or larger.

• If you have a wood or laminate worktop, you may be able to cut the worktop yourself or find a carpenter/joiner.
• If you have a stone worktop and you live in Denmark, we can help you find a partner who will give you a quote for the customisation. It usually costs somewhere between €250 and €600 depending on the type of stone. Our partner does not customise for levelled cooktops.

Choose the cooking zones that suit your habits

Overall width is not the only important measurement. Look at the size and placement of the individual cooking zones as well.

If you often use large frying pans and pots at the same time, four large zones on an 80 cm hob provide more flexibility. If you usually cook with one or two pieces of cookware, a compact 60 cm model may give you everything you need while preserving worktop space.

Ztove 60 cm induction hob

The Ztove 60 cm induction hob is designed for compact kitchens and familiar 60 cm worktop openings. It has four zones: two 200 mm zones and two 160 mm zones.

• Exterior dimensions: 590 × 520 × 4 mm
• Standard cutout dimensions: 560–570 × 490–500 × 49 mm
• Four induction zones
• Temperature control from 0–250 °C with compatible Ztove cookware
• Suitable for standard or flush-mounted installation

Read more about the Ztove 60 cm induction hob

Ztove 80 cm induction hob

The Ztove 80 cm induction hob provides additional space and four large 200 mm cooking zones. It is ideal if you regularly prepare several dishes at once or use larger cookware.

• Exterior dimensions: 800 × 520 × 4 mm
• Standard cutout dimensions: 750–760 × 490–500 × 49 mm
• Four 200 mm induction zones
• Temperature control from 0–250 °C with compatible Ztove cookware
• Suitable for standard or flush-mounted installation

Read more about the Ztove 80 cm induction hob

Ztove 80 cm induction hob with downdraft extraction

The Ztove 80 cm downdraft model combines four large cooking zones with an integrated extractor. It keeps the space above the hob open and can be installed with recirculation or extraction to the outside.

• Exterior dimensions: 800 × 520 × 4 mm
• Standard cutout width and depth: 750–760 × 490–500 mm
• Four 200 mm induction zones
• Integrated extraction from 135–584 m³/h
• Temperature control from 0–250 °C with compatible Ztove cookware

The downdraft unit requires additional space beneath the worktop. Check the current installation guide before planning the cabinet, cutout and ventilation route.

Read more about the Ztove 80 cm downdraft induction hob

Remember the electrical installation

A new induction hob should be connected by a certified electrician. The electrician can confirm whether the existing electrical connection and circuit are suitable for your chosen model.

For the best result, coordinate the electrician, kitchen fitter and worktop supplier before installation, especially if the hob will be flush-mounted or includes downdraft extraction.

Cook with temperature instead of power levels

Ztove works like a regular induction hob with ordinary induction-compatible cookware. When you use Ztove cookware with built-in temperature sensors, you can select a temperature from 0–250 °C instead of relying only on power levels from 1–9.

The hob automatically adjusts its power to reach and maintain the selected temperature, giving you more control when frying, simmering, boiling or preparing delicate sauces.